CIRCUIT CONFORMING THE REALITY OF FREE ENERGY FROM IONIC GRAVITY

 



The gravitation is created due to the difference in energy potential in the battery use in this project.

The energy difference of a 12v charged car battery, that is from the height 12v – 0v, it means the ions will fall from 12v height as in the case of mass falling from a height that is use to turn a tubing.


WORKING OF THE ABOVE CIRCUIT

MODIFIED SLIPT POSITION FREE ENERGY HARNESSING METHOD



When the two (2) relays are off, the led is powered from the battery in the form the ion moving from the highest potential of the battery instead of traveling to the ground of the battery, the ion travels through the positive of the capacitor or if battery is used set the second battery in a charging mode charges the battery and returned to ground of the same powering battery.

From the circuit, it can be seen that the two relays are connected in an identical way the (common of the two relays are use as the positive and negative of the load led). The normally closed terminals serves as the connection running the load (led) from the battery bank1, and the battery bank2 or the capacitor charges as a result of energy flow from highest potential to the ground.

The above circuit can be power from the signal generated from a timer, stable multi-vibrator.


The different in potential must be half the potential of the sources.









     



Comments